Baoxiang automatic high-speed lead pellet forming machine is mainly composed of lead ingot conveying system, lead ingot rolling mechanism, lead plate conveying mechanism, rolling mechanism, lead pellet conveying mechanism, electric control part and so on.
1. Working Principle: lead ingots are put on the material preparation rack and rolled into lead plate twice through the transmission of reducer. The size of lead plate is 1750 * 140 * 20. It is sent to the rolling grain mechanism through the conveying line and rolled into lead grain.
2. Main technical specifications and parameters: lead raw material: pure lead ingot specification: width 120mm high 80mm lead grain specification: 23mm 23mm multi-specification optional, grain thickness 120mm; whole line output: 6 tons per hour; installed power: rated 40KW; Compressed air: 0.6 MPA; WATER: TAP WATER SUPPLY MACHINE APPEARANCE: length and width 5050mm * 3200mm * 2100mm; weight: about 10 tons transport mode: from left to right or right to left (according to customer requirements) .
3. Performance and advantages: high production efficiency, 8 hours a day can complete about 52 tons of lead particle manufacturing; energy-saving and saving raw materials; according to the calculation of 50 kg of lead ingots to produce this piece of lead ingots to complete 28 seconds, one hour can complete 130 pieces of lead ingots. Rated power 40KW, 24 hours to complete 3120 pieces. The lead grain size is even, the scraps are very few, the pellet weight meets the customer request. The utility model has the advantages of simple equipment, easy operation, compact structure, small floor area, easy and skilled use by workers on the spot, and humanized design. The automatic high-speed lead grain molding machine adopts man-machine interface design, the signals of each point are all displayed in man-machine interface. When an alarm appears, the man-machine interface will produce an alarm, it also shows the reason of alarm and can automatically stop or continue production according to the corresponding alarm level, which is convenient for operator to check and remove the trouble quickly Environmental Protection. Because there is no lead melting and no oil pressure cutter, this equipment will not produce lead smoke, oil and water pollution, will not produce environmental impact, and do not need lead smoke collection pipeline and treatment equipment, equipment stability is high, 24 hours continuous production; Fully automatic control to reduce labor cost.
